Concrete Pumps & Safety In The Workplace

One very dangerous thing that is seen in the concrete pumping industry from time to time is people having their arms, fingers, etc. Technical Data used in the field explained in safety officer course in Rawalpindi.   amputated in the field due to cleaning out the pump with their hands while the pump motor is running. Remember, never put any body part in the hopper, outlet valve or lubrication box while the pump is running. Many of these amputations are caused because the operator thinks that just because the remote is off everything is all right. However, what happens is they press the stop button on the remote and then they stick their arm or hand into a moving part on the pump and then they lean up against the pump or whatever and the remote button is pushed on and their arm is chopped off. It happens just like that, fast!

Remember to read the pump manufacturer's operating manual before cleaning or repairing your concrete pump. If you have to service the pump and need to put your hands near moving parts, always shut off the pump engine and remove the key and make sure all pressure is at zero. Some more details of  safety officer course in rawalpindi are as under.

Most pumping companies will see a steady growth in pump jobs due to the summer months ahead. This is a great time of year to service your pumps and equipment. With more pump jobs it means more money. Don't forget to invest back into your equipment. Don't get out on a job and have a problem that could have been avoided.

Check your hoses for wear spots, and holes in the hose. Also, check the hose ends including the inside. Look for thin metal. Check your reducer and the ends of the reducers. Periodically lightly tap your reducers with a hammer. You can actually hear a very bright "ting" if the metal is getting too worn. When this happens, replace it. Here's a little side note. Did you hear about the guy who lost his vision due to the hose exploding open in his face. His employer had no workman's comp and either did the general contractor. TSK Training for Skills and Knowledge is the best institute in Rawalpindi Islamabad for Pakistani Students who wants to join  safety officer course in Islamabad.